FLAMEPROOF LED LIGHT FITTINGS | LINEAR
HAZARDOUS AREA LIGHTING
ZONE 1 & ZONE 2 (21 & 22)
ATEX & IECEX CERTIFIED
Product Category: Hazardous Area Lighting | LED Light Fittings
FDLED Series Flameproof Luminaires, manufactured by Appleton ATX, provide hazardous area lighting for applications in petrochemical facilities, oil refineries, warehouses, manufacturing facilities, pulp and paper mills, water treatment and sewage facilities and underground tunnels. This range of flameproof lighting fittings with Ex d explosion protection can be installed in hazardous areas designated as Zone 1 and Zone 2 (Gas) – Zone 21 and Zone 22 (Dust) and are ideal for use in hazardous area locations where a high degree of corrosion resistance is required and for indoor or outdoor use where protection against dirt, water, dust and moisture is necessary.
Flameproof Appleton ATX LED lights are composed of a white powder coated galvanized steel (400 lm version) or aluminium (2400/4725 lm versions) with grey corrosion-resistant paint and an impact resistant borosilicate glass sealed tube.
The flameproof light fittings are supplied with an energy efficient electronic driver on a removable gear tray, one M20 blanking plug, an external and internal ground/earth connection and an O-ring for improved ingress protection (IP66/68).
Other features of these LEDs include
• Easy access to LED array through grey painted aluminum threaded entry cap
• Easy connection to wire and disconnect with plug-in terminal blocks
• Provide standard and emergency lighting in hazardous areas designated as Zone 1, 2, 21 and 22
• The lighting units are entirely self-contained in a flameproof enclosure
• LED light fixtures ensure optimal light dispersion to maximize usable light and enable you to work safely and comfortably
• Fixtures are relentlessly tested to ensure they meet or exceed their rated capabilities in even the most extreme of conditions
Flameproof LED Specifications
• ATEX/IECEx Certifications and Compliances: Zone 1 and 2 – 21 and 22; Ex II2GD; Ex d IIB (4725 lm version); Ex d IIB+H2 (2400 lm version); Ex d IIC (400 lm version); IK09 (400 and 2400 lm version); IK08 (4725 lm version); IP66/68
• Electrical: 48/110/220 Vdc, 230 Vac, 50 Hz; 110 V to 254 V, 50/60 Hz
• Lumens to Watts: 400 lumens is 6 Watts fluorescent, 2400 lumens is 23 Watts fluorescent, 4725 lumens is 46 Watts fluorescent
• Ambient Temperatures: -30 °C to 60 °C (-22 °F to +140 °F)
• Standard Materials and Finishes: Body is a combination of tempered borosilicate glass tube and aluminum end caps and cover. White powder coated galvanized steel (400 lm version) or aluminium (2400/4725 lm versions) internal reflector with Nitrile (NBR) O-ring gasket
